Waldorf PC8140E, Инструкция по установке и эксплуатации

Страница: 11 / 19

9
Operation
Before Use
1. Check that the electrical supply is switched ‘On’.
2. Check that there are no foreign articles in the tank.
Filling the Tank
NOTE: Tank capacity - 40 Ltrs of water.
1. Before filling the tank, always check that the drain valve behind the access door is closed. A locking
slide is provided on the valve and this should always be locked in position during use. (See Fig 3
and 4 in the ‘Cleaning and Maintenance’ section).
2. Turn the water supply 'On'. Open the appliance water valve and fill the tank with water.
3. The water level will remain at a constant height as there is an overflow at the front of the tank.
4. During cooking, the water level will reduce as it evaporates as steam when boiling and when it
overflows as loaded baskets are dropped into the tank.
5. To maintain the correct water level, the water tap should be adjusted to give a water flow out of the
water supply nozzle that just causes water to continually flow out of the overflow.
This method provides:
• A maintained water level for cooking.
• Skimming or flushing effect to prevent the cooking water becoming gummed up with pasta
residue.
WARNING:
G
REAT CARE MUST BE TAKEN BY THE OPERATOR TO USE THE PASTA COOKER SAFELY
,
TO GUARD AGAINST
THE RISK OF INJURY AND FIRE
.
• DO NOT
LEAVE THE PASTA COOKER UNATTENDED DURING OPERATION
.
• DO NOT
OVER FILL THE WATER IN THE PASTA COOKER ABOVE THE UPPER FILL LEVEL MARK
.
• DO NOT
ALLOW THE WATER IN THE PASTA COOKER TO FALL BELOW THE LOWER LEVEL MARK
.
• DO NOT
USE FLAMMIBLE SOLVENTS AND CLEANING AIDS ON OR IN CLOSE PROXIMITY TO THE PASTA
COOKER WHILST THE PASTA COOKER IS STILL
HOT.
Fig 2
CORRECT LEVEL FOR WATER WHEN
COOKING, KEEP TOPPED UP.
INDICATES MINIMUM (SAFE) LEVEL.
WATER LEVEL SHOULD BE TOPPED UP.