Waldorf FNL8127E, Инструкция по установке и эксплуатации, Страница: 5 / 19

3
Specifications
Model Numbers Covered in this Specification
FNL8127E 'Fast-Fri' Electric Fryer, Manual Control (Single Tank - 27ltr, 17kW).
FNL8224E 'Fast-Fri' Electric Fryer, Manual Control (Twin Tank - 24 ltr, 14kW).
Electrical Supply Requirements
Electrical Connection
Electrical supply connection point is located at the rear of the appliance, approximately 62mm from
the right hand side, 404mm from the rear and 441mm from the floor.
When connecting a this electric appliance to the mains supply, ensure that the following is carried
out:-

The supply cord shall not be lighter than ordinary tough rubber sheathed (oil
resistant) cord. e.g. H05 RN-F with sufficient current carrying capacity cable sizes.
 The branch supply line shall be overload protected.
 The point of connection shall be as close as practicable to the appliance have an
isolating switch accessible during manual operation of the appliance.
 The supply cord shall be protected against any mechanical or thermal damage.
Refer to the appropriate wiring standards for the size of cable that is to be supplied to an appliance
for the current drawn on that line.
Model
Power Supply
Total Power
Input
Amps
Voltage Type Frequency
L1 L2 L3
FNL8127E
400-415Vac 3 P+N+E 50 / 60Hz 17kW 23.6 23.6 23.6
FNL8224E 400-415Vac 3 P+N+E 50 / 60Hz 14kW 19.5 19.5 19.5
T
HIS APPLIANCE MUST BE EARTHED
. I
F SUPPLY CORD IS DAMAGED
,
IT MUST BE REPLACED BY A SUITABLY
QUALIFIED PERSON IN ORDER TO AVOID A HAZARD
.
Warning