Waldorf BPB8080E, Инструкция по установке и эксплуатации

Страница: 6 / 24

4
Electrical supply connection point is located at the rear of the appliance, approximately 87 mm from
the left hand side, 557 mm from the rear and 335 mm (290 mm for BP8120E/EE) from the floor.
Water Supply Requirements
Cold water connection is
1
/
2
" tube connection via 15 mm crox fitting located 280 mm from the LH side,
575 mm from rear and 241 mm from the floor.
The water supply must be protected by an 'In-Line' sediment filter / strainer, which should be fitted into
the pipeline prior to the Bratt Pan water connection.
Maximum water supply pressure 550kPa (80psi).
Maximum water inlet temperature - 80°C.
Specifications