1
1. Turn off
hopper
3
3. Put on hopper
by turning
13
14
4
4. Start operation as
indicated on page 8
2
2. Clean with a brush
or aspirator
MILL
LAD
Y
MILL
LAD
Y
CLEANING
OF MILL
0
MIKRO
20
30
10
Clean housing with a soft, damp towel.
Clean grinding chamber with a brush or aspirator.
Clean the millstones by grinding roughly rice or
corn or by using a brush.
Never use sharp items or chemicals for the clea-
ning of the housing.
Open the mill: The device can be opened easily by
removing the hopper. When closing make sure the
hopper is in place properly.
The device has a safety button. When removing the
hopper the motor stops automatically - children
protection.
The device is free of service and maintenance.
However, keep original packing for possible trans-
port.
!
