Waldmann TALK Bluetooth, Руководство по эксплуатации

Страница: 35 / 84

35
Configuring the swarm control
ENG
Fig. 14: Swarm control activated.
X Slide the “mode“ slide switch to posi-
tion 1 , see Fig. 14.
Once the module has been connected,
all luminaires to which a module has
been connected will communicate with
each other.
After no later than 5 minutes, the auto-
matic teach-in process will be com-
plete, updating taking place at regular
intervals.
6.4 Deactivating the swarm
control
Fig. 15: Swarm control deactivated.
X
If you configure the swarm con-
trol via the LIGHT ADMIN App:
Deactivate the swarm control via the
LIGHT ADMIN App.
X If you configure the swarm control
directly on the module: Push the slide
switch “mode“ to position 0 , see
Fig. 15, and make sure that at least one
rotary coding switch is not at position
0 , for example at position 1 .
The function is deactivated. All other
functions such as communication with
external transmitters and receivers
remain active.