Waldmann TALK Bluetooth, Руководство по эксплуатации

Страница: 34 / 84

34
Configuring the swarm control
ENG
6.2 Configuring the swarm
control | Via the LIGHT
ADMIN App
X Download the LIGHT ADMIN App. The
links for downloading the app for Win-
dows, Android and iOS can be found
on our Website www.light-admin.com.
X
Register for the use of the LIGHT
ADMIN App under:
www.waldmann.com/registration.
X
Set the sliding switch and all rotary cod-
ing switches on the module to posi-
tion 0 .
X
Plan which areas and which groups the
luminaires should be affected to.
X
Configure the swarm control via the
LIGHT ADMIN App.
6.3 Configuring the swarm
control | On the module
X Plan which area and which groups the
luminaire should be affected to.
Fig. 12: “area“ rotary coding switch.
X
Set both “area“ rotary coding switches
to the desired area address, see Fig. 12.
Fig. 13: “group1“ and “group2“ rotary cod-
ing switches.
X If you want to assign the luminaire to
exactly one group, both rotary cod-
ing switches “group1“ and “group2“
should be set to the same group
address, see Fig. 13.
X
If you want to assign the luminaire
exactly to two different groups, the
“group1“ and “group2“ rotary coding
switches must be set to the relevant
group addresses.