Seite/Page 13 / 14 / SAP-Dokument-Nr.: 10000155789 / 03.02.2022
After successful connection the device switches to normal operation and the status-LED starts
showing the default colour green (might be different for specific installations).
In normal operation the status-LED and the reaction to the user push buttons are under control of the cloud
application.
Configuration mode
If no valid configuration is stored in the device, it will enter and stay in the configuration mode
automatically.
If the device is already commissioned, the configuration mode can be entered manually by holding the
configuration push button on the back of the device for longer than 5 seconds.
This will be confirmed by the status-LED with 3 times orange blinking.
While preparing for the configuration the status-LED then will pulsate in orange.
When the configuration can start, the status-LED will show static orange.
If no configuration is started within the next 2 minutes, the devices will automatically exit the configuration
mode.
While in configuration mode, the following options are enabled:
•
NFC read of device information, such as version, serial, MAC address, etc.
•
NFC write of configuration data or executing special functions (depending on the currently running
network mode)
•
BlueRange P2P Access for changes on the enrollment status.
Change from Wi-Fi to BlueRange
Enter the configuration mode.
On your mobile device, please go to the LVE App (or BlueRange Admin App) and execute the BlueRange
enrollment.
Change from BlueRange to Wi-Fi
Enter the configuration mode.
On your mobile device, please go to the LVE App and execute the Wi-Fi commissioning.
3
