3
Code Programming
1.2. Code programming menu
Attention:
It is essential to reprogram the original opening code (master code 1)
0 0 1 2 3 4 5 6, as a third party may
know this factory code and
open the safe.
All code reprogramming must be performed with the door open.
1.2.1. Master code
Procedure
1. open the lock with previous code (for first time programming 0 0 1 2 3 4 5 6).
2. turn the opening rotary handle to the open position and open the safe door.
3. with the lock open, press the MODE key, PRG-MOD appears on the display.
4. Enter existing MASTER-CODE (for initial programming 0 0 1 2 3 4 5 6),
confirm with ENTER, TIME appears in the display.
5. Press arrow key until CODE appears, confirm with ENTER.
6. MASTER appears in the display, confirm with ENTER.
7. AENDERN? appears in the display. YES, confirm with ENTER.
8. Enter new master code 00 X X X X X Confirm with ENTER.
9. BESTAET appears in the display.
10. Enter new code 00 X X X X again and confirm with ENTER.
11. ACCEPT appears in the display. Exit the menu by pressing the i key 2-3
times.
12.
with the door open, turn the opening rotary handle to the closed position, the
lock closes immediately, test the new code at least 3 times with the door
open.
