Waldbeck 10030601, Руководство пользователя

Страница: 12 / 13

12
Maintencance and Cleaning
• Important: Connect the water pumps first, and then connect the UV device.
Do not run the device without water. This device will be automatically turned
on after the power on.
The device is working if the blue light is turned on.
Changing the UV light (Replacement after 8000 hours)
Pict. A: Turn the head according to the direction of arrow.
Pict. B: Take out the head according to the direction of arrow.
Pict. C: Take out the UV lamp according to the direction of arrow and replace it. (Only for
the UV lamp that have the same name, brand and power. Both Inside and outside
of the casing should be cleaned
Pict. D: Loosen the four screws by screwdriver.
Pict. E: Take out the brackets according to the direction of the arrow.
Pict. F: Take out the quartz glass tube according to the direction of arrow.
Pict. G: Check the quartz glass tube and clean it with clean and wet cloth. Please use vin-
egar to clean the quartz glass tube if there is much incrustation.