Page 6
RegulatoR PRogRaMMing
Programming the Wakespeed WS100/12
is remarkably simple. Five programs,
listed below, can be selected by rotating
the (GREEN) color-coded knob marked
Program Select, located to the right of
center at the top of the regulator.
As the knob is turned clockwise or counter-
clockwise, the the lights marked one
through five on the regulator’s label will light
up, indicating your program selection.
Note: the regulator must be turned on
prior to programming. When turned on, the
regulator will display the #1 green light, and
the number of the existing program setting
at start up. Program Select choices are as
follows:
Program #1 Standard Flooded/gel —
Designed to properly charge standard (thin plate) flooded and gel
battery types. See chart on Page 6 for specific charging voltage values.
Program #1 is indicated by the far left green light marked “1”.
Program #2 Standard absorbed glass Mat —
Program #2 provides proper charging voltages for many common AGM-
type batteries. See chart on Page 6 for specific charging voltage values.
Program #2 is indicated when #1 and #2 green lights are illuminated.
lights are illuminated.
NOTE: To provide protection from accidental program changes, any
adjustments will only be implemented by turning off the ignition
and disconnecting the regulator from its power source after
changes have been made. The new program will initiate with the
subsequent engine start up.
WS100/12 Product Manual
Regulator Programming
PRogRaM aDjuStMent KnoB
