Wai Hang Qi-1110, Руководство пользователя, Страница: 6 / 9

Connecting to power
1. Connect the cord of the power adapter to the DC IN jack of the radio.
2. Connect the plug of the power adapter to a wall socket.
The radio is powered and in standby mode when you see the display is switched on.
Backup system
The radio is equipped with a backup system. Open the battery door on the rear of the unit by
press the tab and then lifting it. Insert 2x AAA size batteries (not included) according to the
polarity diagram inside the battery compartment. (Alkaline batteries are recommended.)
• If a power cut occurs, the radio automatically switches to the battery power supply and
keeps the clock and timer settings.
• When replacing the battery, do not disconnect the power adapter. Otherwise, all clock and
alarm settings will be lost.
Setting the clock
1. In standby mode, press and hold the CLOCK button to enter the clock setting mode.
2. Press the CLOCK button repeatedly to cycle through the setting options:
Year > Month/Day > Time

Setting year : Press the BACKWARD or FORWARD button.

Setting month/day : Press the BACKWARD button to set the month and FORWARD button
to set the day.

Setting the time : Press the BACKWARD button to set the hour time and FORWARD button
to set the minute time.

Press the SET button to confirm each setting option.
Listening to radio
1. Press the POWER button to switch the radio on.
2. Press the BACKWARD or FORWARD button to adjust frequency.
3. Press and hold the BACKWARD or FORWARD button to automatically tune to the next
available FM station.
4. Press the POWER button to switch the radio off.
**Unroll and extend the antenna to improve FM signal reception.
Setting preset stations
You can store up to 10 preset stations.
1.
Tune to a station.
2. Press and hold the MEM/M+ button until “P01” (or the next available preset slot) shows
on the display.
3. Press the BACKWARD or FORWARD button to select a preset number (P01‐P10).
4. Press the SET button to confirm. The preset station has been set up.
5. Press the MEM/M+ button repeatedly while listening to the radio to select a preset station.
Alternatively, press the MEM/M+ button once and then press the BACKWARD or
FORWARD button to select a preset station.