8 & 10 INCH JOINTER HOLES LOCATION DIMENSIONS
2
10mm
120mm
10mm
120mm
I
NSTRUCTION A ( FOR CAST IRON TABLES)
Our Fence Stabilizer System is very easy to install on our Wahuda machines. You simply
drill a 4.3mm diameter hole following the location dimensions of the sketches that match
the model of machine you have in the infeed and outfeed tables, then using the provided
M5 tapping screw to tap a thread in the table to attach the stabilizing bracket .
NSTRUCTION B ( FOR CAST ALUMINUM TABLES)
Our Fence Stabilizer System is very easy to install and can even be used to stabilize the
fence on some models of our competitor s machines. You simply drill a 4.3mm diameter
hole following the location dimensions of the sketches that match the model of machine
you have in the infeed and outfeed tables. Then using the provided M5 tapping screw to
tap a thread in the table to attach the stabilizing bracket. You may need to use the
provided nut to secure the stabilizer as the wall of the table may be too thin for the
threads to hold it in place.
