Wall Mount 2R Speaker Installation Guide Page 5
10.25.2020
PRIMARY SPEAKER
The -2R speaker receives its power and data from a Wahsega primary
speaker. Connect a Cat5e or Cat6 straight cable to the primary speaker
up to 20m away. Do not use a crossover cable.
Compatible models: WL-SPKR-22-CAR, WL-SPKR-22-INF,
WL-SPKR-SMT-CAR or WL-SPKR-SMT-INF
Once the unit is successfully powered, the amber indicator LED on
the front of the speaker will begin to blink.
WALLPLATE INPUT
Connect to optional Wahsega Sound Reinforcement Input Panel up to
100ft away via Cat5e or Cat6 cable.
Compatible model: WL-SPKR-RSR-W
Use a straight cable. Do not use a crossover cable.
TERMINAL BLOCKS
MIC IN +
Unused
MIC IN -
Unused
12 V OUT
Fused, nominal 12V output, max 0.5A. Subject to
power capabilities of PoE.
12 V RTN (GND)
Ground
SPKR -
Unused
SPKR +
Unused
INPUT 4
Contact closure to ground (
12 V RTN
).
Connect a Volume Button or SNMP Variable/Trap
contact using
Input 4
and
12 V RTN (GND)
.
RELAY 1: NO
Isolated dry contact closure. Normally Open.
RELAY 1: COM
Isolated dry contact closure. Common.
RELAY 1: NC
Isolated dry contact closure. Normally Closed.
