Carina IP Panic Button User’s Guide
Page 24
v
3.0.0.20201022
Steps for activating the factory reset:
1.
Unplug the
IP Panic Button
from power.
2.
Install a 2mm jumper on the two pins according to which type of
factory reset you want. (For example, to erase the configuration
and revert to default settings, install a jumper across pins 2 and
3.)
3.
With the jumper in place, plug in power to the
IP Panic Button
(using PoE).
4.
Wait
at least 10 seconds
for the
IP Panic Button
to boot, read the
jumper, and apply the factory reset.
5.
Unplug the
IP Panic Button
from power.
6.
Remove the jumper.
7.
Re-apply power.
8.
When the IP Panic Button boots up again, it will have been
restored to factory defaults based on the jumpers.
