Carina Wall Mount IP Speaker User’s Guide Page 29
v
3.0.1.20200827
Steps for activating a full factory reset:
1.
Start with the PoE cable unplugged and the IP Speaker powered
off
.
2.
Jumper Input 3 and Input 4 (highlighted in yellow, above).
3.
While jumper is in place, plug in the PoE cable and apply power to
your IP Speaker.
4.
Once power is applied, continue to hold the jumper in place for
at
least five (5) seconds.
5.
After 5 seconds, the status light will flash to indicate that the file
system has been reformatted and all data has been erased from the
device.
6.
Remove jumper and restart your IP Speaker for the new settings to
take effect.
7.
If you have previously changed the IP address of your IP Speaker to a
static IP address, keep in mind that restoring factory default settings
will return your IP Speaker to dynamic IP (DHCP) mode. You will
need to use the new, dynamic IP address to gain access to your IP
Speaker’s configuration webpages once again.
