when available to improve the performance of your sensor. The free Wahoo Utility app is
required to perform firmware updates and is available from the Google Play Store.
ENDING YOUR WORKOUT (Android):
1.
To end your workout, simply select the red “Pause” button.
2.
Select the red “Stop” button and either a) Discard b) Save or c) Cancel.
3.
If you elect to save & finish the workout, the Wahoo Fitness app will now display a
summary of your workout.
For more information: Please refer to the instructions page for the Wahoo Fitness app.
WANT TO CONNECT TO ANOTHER APP?
This product is compatible with a number of third party apps. However, each app connects to
sensors a little differently. As a general rule: Open the compatible app you would like to use and
find the settings. Look for "connect to sensor" or another similar option. You must connect each
sensor separately for each app you use.
NOTE: Bluetooth devices can only pair to one app at a time. Make sure to close any background
apps that may be using the sensor before connecting to a new app.
Troubleshoot
Use the Wahoo Utility app to test your hardware for
connectivity issues (iOS):
1.
Download the Wahoo Utility app from the App Store.
2.
Open the Wahoo Utility app.
3.
Select “Test Bluetooth 4.0 Sensors”.
4.
Select “BlueSC/Wahoo RPM Cadence”. The Wahoo Utility will now try to connect to the
sensor. Make sure you have Bluetooth turned on.
5.
Activate the Wahoo RPM Cadence by shaking it for a few seconds or if attached to your
bike spin the crank a few times. The Wahoo RPM Cadence will start to flash to indicate it
is awake. The Wahoo Utility should now connect to your sensor & display information
regarding sensor data and the firmware version to confirm connectivity.
6.
Close the Wahoo Utility app to disconnect the pairing when finished testing.
NOTE: If a firmware update is available for your sensor, the Wahoo Utility app will prompt you
to proceed with performing an update. Apply updates when available to improve the
performance of your sensor.
