6
James Martin Hand blender
6. The turbo (high speed) button operates the appliance at the highest speed.
Press and hold the Turbo button down.
NOTE
The speed selector will not change the speed when you are using the turbo
button.
7. Work though the ingredients with a gentle up and down movement of the blender.
8. Most food will require shorts bursts of blending to obtain the required results.
9. Do not operate the appliance for longer than 1 minute continuously or if the
appliance becomes hot.
10. To stop simply release the button.
11. After use, unplug the blender and remove the blender attachment.
TIPS
Hold the blender straight and blend under the surface of the food for best results and
to avoid splashing.
Always remove saucepans from the heat, and do not blend boiling liquids.
Start with the low speed and move to the turbo speed if required.
Use short bursts of power to allow you to get the desired results and avoid over
blending.
A tall narrow beaker is best for blending.
Frozen fruit is great for blending to create ice cold smoothies.
Always ensure that food pieces are not too large 2 cm or smaller is ideal.
Always ensure there is enough liquid to successfully blend.
USING THE WHISK ATTACHMENT
1) Attach the Whisk attachment onto the motor unit by aligning the markings
and turning in an anti-clockwise direction until tightened onto the motor unit. To
disassemble, turn clockwise to undo.
2) Place the whisk in to a bowl or mixing vessel and press the speed button to mix
the food. Start with a low speed and use the speed selector and high speed (turbo) if
required.
3) After use, unplug the blender and remove whisk attachment
TIPS
Use a wide vessel.
Start with the low speed and move to the turbo speed if required to ensure any dry
ingredients are incorporated and a snow storm effect is avoided.
Only whip up to 4 egg whites.
Move the whisk clockwise.
USING THE CHOPPER ATTACHMENT
WARNING:
THE BLADE IS SHARP! ALWAYS HOLD IT BY THE PLASTIC PART AND
TAKE GREAT CARE NOT TO TOUCH THE BLADE.
1) Place the blade in the centre of the chopper bowl.
2) Place the food in the bowl, do not exceed the max marking on the bowl.
3) Place the lid onto the bowl
4) Attach the motor unit onto the lid securely.
