13
ULTIMA PLUS SHAVER
THREE- / FIVE-DAY BEARD SHAVER
• You can use the long hair trimmer (6) and the trimmer cap (8) to
shave a three or five day beard. Click the trimmer cap (8) onto the
blade head (2).
• Slide the long hair trimmer (6) into the desired position.
a)Position 1 will produce a beard length of approximately 4 mm
(five-day beard)
b)Position 2 will produce a beard length of approximately 2 mm
(three-day beard)
NOTE: When using the attachment comb, there is no direct
contact between the shaving foil and the skin. This means
that the blade system will not receive its usual natural oil and
therefore additional oiling may be required.
• To ensure that your shaver continues to provide you with lasting
shaving quality, be sure to apply a drop of Wahl Clipper oil on
the foils after having cleaned the shaver after use. Remove the
trimmer cap (8) by pressing the unlocking buttons (9) on both
sides and pull off the trimmer cap.
CLEANING AND MAINTENANCE
DANGER! Remove the charger from the power point before
cleaning the shaver. Never submerge the entire shaver in
water.
DRY CLEANING
•Always switch off the shaver before cleaning it.
•Do not use any harsh or abrasive cleaning agents.
•Do not remove the shaving foil from the shaving foil frame and
do not clean it with the brush.
NOTE: Clean the shaver after every use to guarantee
optimal results.
•Press the locking buttons on the sides (10) and remove the
blade head (2).
•Place the blade head on a flat surface and blow it out.
•Clean the cutting blades with the cleaning brush.
