PROGRAMMING MODES
16
TC6XX-TM6XX Series
Attention, the choice of °C or °F is made in the
Setup\Preferences\temp unit
menu.
Using the F1 key, define the CSF used by positioning the cursor on it (for TC621, TM602 and TM630 units
only).
Enter the menu by pressing
F2
.
Using the navigation keys
(
and
)
, choose the CSF (
OFF
: None,
ON
: internal or
programmed
).
Press
VAL
to confirm.
Press VAL (again) to confirm the desired function and go back to the measurement screen.
The
Measurement
mode makes it possible to display the Min (bottom left), Average (bottom centre) and Max
values (bottom right) from the last
Min/Max Reset
command.
Access this command by pressing the F2 key.
Using the navigation keys
(
and
),
position the cursor in the
Min/Max Reset
field.
Confirm the latter using the
VAL
key.
Note:
Following a significant thermal shock, it is advisable to allow the device to stabili
z
e its temperature to use the
internal reference junction (CSF) with the utmost precision (TC621, TM602 and TM630 units).
