Wahl ST2200, Руководство пользователя

Страница: 5 / 34

ST2200 Soldering Iron Tester User Manual
Page 5 of 34
Test Current:
10 mA DC
LED Warning Indicator:
Factory set at 5.00 Ohms. Switchable to 2.00 Ohms
via internal jumper (see section 6.1 for details).
Millivolt Specifications :
Voltage Range: 0 - 30mV true RMS AC or AC+DC range.
Resolution:
Factory set at 0.01 mV. Switchable to 0.1 mV via
internal jumper (see section 6.1 for details).
Accuracy:
±
0.1mV
±
1 digit.
LED Warning Indicator:
Indicates at 2.0mV threshold.
Digital Display : 4-1/2 digit LCD, 0.7" high characters.
Output Jack :
Type: .101" Subminiature phone jack
Temperature:
1.0 mV/degree,
±
5
°
F.
Resistance:
100 mV/Ohm for the 0-30 Ohm range,
±
0.15 Ohm.
Voltage:
100mV/mV for the 0-30mV range,
±
0.15mV.
Protection:
Short circuit and Over Voltage protected.
Auxiliary AC Outlet : Equipped with North American receptacle. Note:
220Volt models also equipped with North American
receptacle, marked as 220VAC.
Auxiliary T/C Connector : Mini Type K thermocouple female connector
provided for use with optional T/C probes.
User selectable by front panel switch.
Wrist Strap Tester : Activated in Resistance /Wrist Strap Test position.
Bi-color LED indicates Green when in acceptable
range of 500K to 10M ohms. Red when outside of
acceptable range.
Voltage Spike Detector : Activated in both Millivolt ranges. Indicates green
in no-fault condition and flashes red for approx.
1 sec. when spike detected.