Wahl PET NAIL GRINDER, Инструкция по эксплуатации

Страница: 10 / 16

10
PET NAIL GRINDER
OPERATING INSTRUCTIONS
1. Using your thumb, apply light to moderate pressure to your
pet’s pads in order to separate their toes. Hold paw firmly.
2. Turn appliance ON. The ON/OFF switch is located on the front
of the appliance.
3. For best results, start filing from the bottom of the nail, slowly
moving toward the tip. Apply consistent pressure, moving the
grinder from side to side on each nail.
WARNING:
Do not over-file or apply excessive pressure.
4. To avoid tangling of hair on long-haired breed dogs, push hair
away from pets paw before using the appliance. For best results,
use a nylon stocking over pets paw and push nails through
stocking.
5. For larger dogs, position the front paw forward in order to file
nails.
6. For smaller animals, hold their paw up and position it below
their body. Pay extra attention not to entangle hair.
CHANGING ATTACHMENTS
1. Ensure appliance is in the OFF position before changing
attachments.
2. To unlock the locking nut, simply press on the release button
located at the top/front of the machine.
3. Press your thumb firmly on the release button; turn the locking
nut counter clockwise until the attachments release.
4. While pressing on the release button, insert attachment head as
far as it can go. Turn the locking nut clockwise until it tightens and
is secured into place.
5. Remove thumb from release button.