14
James Martin Food Processor
CLEANING AND MAINTENANCE
NOTE
: Always clean removable parts immediately after use.
WARNING:
BE CAREFUL WHEN CLEANING THE PARTS. AVOID
TOUCHING THE BLADES AS THESE ARE EXTREMELY SHARP.
NEVER IMMERSE THE MAIN HOUSING IN WATER OR ANY OTHER LIQUID
1. Always unplug the appliance before cleaning.
2. Disassemble all removable parts before cleaning.
3. Clean the main housing with a clean damp cloth and dry thoroughly.
Ensure that the interlock areas are free from food.
4. Clean all removable parts in a dishwasher or in luke warm soapy water
using a mild detergent.
5. Push access cord into the storage area in the bottom of the housing.
WIRING
WARNING: If the supply cord is damaged it must be replaced by the
manufacturers service agent or a similarly qualified person in order to avoid a
hazard.
The wires in the mains lead of this Food Processor are coloured in accordance
to the following code:
Blue Neutral (N)
Brown live (L)
This appliance is fitted with a 3 pin plug which has a 5amp fuse fitted.
If the plug supplied is not suitable for your socket or becomes damaged, it
should be cut off and disposed of, and a suitable plug fitted as detailed below.
As the colours of the wires in the mains lead of this Food Processor may not
correspond with the colour markings identifying the terminals in your plug,
proceed as follows.
The wire which is coloured BLUE must be connected to the terminal in the plug
which is marked with the letter ‘N’ or coloured BLACK or BLUE.
The wire which is coloured BROWN must be connected to the terminal in the
plug which is marked with the letter ‘L’ or coloured RED or BROWN.
DO NOT connect either wire to the terminal in the plug which is marked with
the letter ‘E’ or has the Earth symbol, or coloured GREEN or GREEN/YELLOW
