Wahl HorseLine AVALON, Руководство пользователя

Страница: 11 / 20

11. ARTIKO
Wahl recommend this product is serviced by a qualified technician regularly to maintain
performance and efficiency. (Manufacturer contact details on page 18.)
CLEANING THE AIR FILTER
To ensure a good supply of air to the motor it is essential that the air filter is cleaned
regularly.
1. Remove the filter cover (Fig.4a) and clean the air filter with the cleaning brush.
2. Re-insert the filter cover until it locks into position (Fig. 4b).
The clipper case may be cleaned with a soft cloth, which may be dampened slightly.
Do not use solvents or scouring agents as this will damage the coating.
WIRING
WARNING: If the supply cord is damaged it must be replaced by the manufacturer’s service
agent or a similarly qualified person in order to avoid a hazard.
The wires in the mains lead of this clipper are coloured in accordance to the following code:
Blue Neutral (N) Brown Live (L)
This appliance is fitted with a 3pin plug which has a 13amp fuse fitted
If the supply cord is not suitable for your socket or becomes damaged, it should be cut off
and disposed of, and a suitable plug fitted as detailed:
As the colours of the wires in the mains lead of this clipper may not correspond with the
colour markings identifying the terminals in your plug proceed as follows:
The wire which is coloured BLUE must be connected to the terminal in the plug which is
marked with the letter N or coloured BLUE or BLACK.
The wire which is coloured BROWN must be connected to the terminal in the plug which is
marked with the letter L or coloured BROWN or RED.
Do not connect either wire to the terminal in the plug which is marked with the letter E, has
the Earth symbol, or coloured GREEN or GREEN AND YELLOW.