Wahl Heat Spy DHS520, Руководство пользователя

Страница: 64 / 65

Page 48
Wahl DHS520
User Manual
Advanced Mode - data stream
When the trigger is pressed to the T1 position, a continuous stream of lines of data
is produced every 0.5 ±0.1seconds:
B 1 C I +972.0 CR LF
As per Classic Mode stream except
(i) Packet 1 Advanced mode - trigger 1 pressed
There is no handshaking of the advanced data stream.
Advanced – History mode packet
When the trigger is pressed to the T1 position, a 6 line packet of calculated data is
output.
EXAMPLE: B
2
C I
+972.0
CR LF
B 2 C P +1030 CR LF
B 2 C V +812.0 CR LF
B 2 C A +900.0 CR LF
B 2 C E +1.000 CR LF
{ B 2 C T +1.000 CR LF
or if disabled
{ B 2 C T + OFF CR LF
As per Advanced Mode - data stream except:
(i) Packet 2 Advanced – History mode packet
(ii) Mode E Emissivity
T Window Transmission
(iii) Data In thousandths for emissivity/transmission
The IPAQ should send a * handshake to indicate packet reception.
Advanced – Burst Mode packet
When T2 is pressed in burst mode, a continuous stream of lines of data is output
every 30 ±5ms. Example:
B 3 C I +972.0 CR LF
As above except:
(i) Packet 3 Advanced - Burst mode packet
When T2 is released in burst mode, a 2-line termination packet is output:
B 3 C E +1.000 CR LF
{ B 3 C T +1.000 CR LF
or if disabled
{ B 3 C T + OFF CR LF
The IPAQ should send a * handshake to indicate termination packet reception.