Wahl Creativa, Инструкция по эксплуатации

Страница: 10 / 16

10
Creativa
OPERATING INSTRUCTIONS
CHARGING THE BATTERY
This cordless clipper is supplied with two battery packs.
While the appliance is in use, the second battery pack can be
recharged on the charging stand. This means that the clipper
is always ready for use. Before the appliance is used for the
first time, each battery pack should be charged for approx 120
minutes.
1. Connect the appliance plug (Fig. 1L) on the plug-in
transformer to the charging stand socket (Fig. 1H)
2. Connect the plug-in transformer to the mains
socket (Fig. 2b).
3. Insert the battery pack into the recess of the charging
stand (Fig. 4). The charging process starts. During
charging, the charging indicator (D) flashes red. It should
take around 120 minutes for the XXL BATTERY pack to
charge to full capacity. The second battery can remain
in the charging stand so that a charged battery pack is
always available.
4. Once charging is complete, the charging indicator (D)
lights up green.
BATTERY OPERATION
Battery Operation
Switch on the appliance using the on/off switch and switch off
after use (Fig. 1B).
• In case of insufficient maintenance of the blade set,
the operating time can be reduced considerably. (See
cleaning and maintenance section page 12)
• While in operation with a fully charged battery, the
charging indicator (D) lights up green.
• Whenever the charging indicator (D) lights up red during
operation, the battery pack needs to be recharged. You
can now use the charged replacement battery pack.