14
Rechargeable Trimmer
FADE CUT using T-Blade
1.Start at the temple and cut all the way around the head to establish the
ultimate location of the fade line. Always cut against the grain for the
shortest cut. Don’t force the blade through the hair. Let the trimmer do
the work.
2.Next, cut around the head again and up the nape of the neck to the
fade line, brushing away the cut hair as you go. Pull the scalp taut
with the thumb for the closest cut. Turn the trimmer upside down when
necessary to keep cutting against the grain. Make sure both sides of
the head are even.
3.For the top of the head, cut with the grain using the individual guide
comb attachments. The smaller the number of the comb, the shorter
the cut. Comb or brush the hair as you cut for an even end result.
4.To complete the fade, blend the hair at the fade line by trimming up
and out across the line and against the grain all the way around the
head. Then, repeat all around, turning the trimmer upside down and
cutting downward. The final objective is to blend the hair so there
is no real line, just a perfect fade from bald to very short hair. You
can achieve this by using the #1 guide comb attachment. Continue
combing and cutting until you achieve the desired effect.
5.To create a part, pick a spot off-center. Pull the scalp tight and with the
end of the blade perpendicular to the head, move the trimmer back
and forth to cut a line. Comb through it and cut again to make sure the
cut is precise.
DETAILING NECKLINES, SIDEBURNS, MOUSTACHES
& BEARDS
using trimmer head.
Slowly move trimmer downward on desired areas to neatly trim and
shape.
TRIMMING ARM & LEG HAIR
using trimmer head.
Simply glide the trimmer over your arm or leg until desired hair length
is achieved. The first time you trim the hair, start by using a longer
setting on the guide comb on the trimmer, then use progressively shorter
settings if a shorter length is preferred.
TRIMMING CHEST & STOMACH
using trimmer head.
Glide the trimmer over your torso region, in an upward motion until
