WAGO TP298, Руководство пользователя

Страница: 8 / 42

8
TP298
After some seconds, the FEED button will light up in green. Push the FEED button once. The printer
will measure the existing labels within seconds (approx. 6-7 labels). When you then push FEED, each
label will be advanced forward individually. The printer has correctly measured the WMB label and
the gutter.
If this is not the case, please recheck the position of the print light sensor, turn off the device and
restart the calibration process.
After you have created a project with WMB Inline inscription (2009-115) in smartDESIGNER,
please note the following setting values prior to label output:
1.1.4.
Maintenance information for the thermal transfer printer
The ongoing maintenance of the print head and the roller are essential for a long lifespan of these
components.
When inscribing WMB Inline, you should clean the device after every second spool (3,000 WMB).
When inscribing marking strips, you should clean the device after every 50 to 100 meters.
Maintenance instructions are found in the manual.