WAGO Pro 2, Руководство пользователя

Страница: 41 / 68

2787-2147 Configuration
Product manual | Version: 1.0.0 41
Power Supply Pro 2
9.3.1 Menu Bar
The menu bar is divided into the “Backstage” and “Device” tabs (see also section
8 Starting the Software [ } 37] ).
9.3.1.1 “Backstage” Tab
The settings options on the “Backstage” tab are described in section
8
Starting the
Software [ } 37] .
9.3.1.2 “Device” Tab
Figure 24: “Device” Tab
Table 49: “Device” Tab
Menu Item Description
Select Open the product selection to select a new product
(see also section
8
Starting the Software [
}
37] ).
Disconnect
Connect
Connects/disconnects the connected product to/from
the software
Settings Opens the “Settings” dialog. The dialog is described in
section
8 Dialog: Settings [ } 41] .
Snapshot Creates a snapshot of all parameters and measured
values, which can be stored as a CSV file.
Update Performs a firmware update on the product.
You can get the current firmware update and corre-
sponding compatibility information from WAGO Tech-
nical Support.
9.3.1.2.1 Dialog: Settings
In this dialog, you can modify settings for the product. Two options are available:
• Online: With this option, the
[Save to device] button writes the settings directly to the
product.
• Offline: With this option, the settings must be saved externally using the [Export] but-
ton. If a product is connected to the software later on, you can import these settings
into the software with the
[Import] button and then write them directly to the product
with the [Save to device] button.
The settings can be made in the following sections:
•
DC Output
• Signalization
• System
• Password
The buttons apply generally and are identical in all sections.
Buttons
Figure 25: Dialog: Settings – Buttons