WAGO PERSPECTO® 762
Device Description 19
762-1057 WP 57 QVGA
Manual
Version 1.4.1
3.3.2
X6 – ETHERNET Interface
An RJ45 jack is used for the ETHERNET interface.
The connections and cables must meet CAT.5 and the guidelines for ETHERNET
interfaces.
If there are more than 2 devices in a network, then they must be connected to
each other by a HUB or SWITCH. A "1:1" cable is used here.
If there are only 2 devices in a network, a crossover cable can be used.
Figure 4: Connector X6 ‒ ETHERNET RJ45
Table 6: X6 Pin Assignment
Pin
Assignment
Function
1
TX+
Transmit Data +
2
TX-
Transmit Data -
3
RX+
Receive Data +
4
n.c.
-
5
n.c.
-
6
RX-
Receive Data -
7
n.c.
-
8
n.c.
-
