WAGO PERSPECTO VP Visu-Panel 762 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 50

WAGO PERSPECTO VP Visu-Panel 762 Скачать руководство пользователя страница 10

10

Important Notes

WAGO-PERSPECTO 762

762-2035, -2057, -2104, -2121, -2150 PERSPECTO VP, Visu-Panel

2.1.3

Use of the 762 Series in Compliance with Underlying
Provisions

762 Series modules are suitable for use in the area of time control and automation.
Their use extends beyond residential and commercial areas, as well as industrial
areas. In all application cases for controlling inductive loads (motors and relays,
etc.), it must be ensured that the occurring voltage peaks do not exceed the
maximum input voltages of the I/O specified in the technical data. External
protective circuits may need to be installed.

This is a class A device. This device can cause radio interference in residential
areas. In this case, the operator may be required to take appropriate measures.

2.1.4

Technical Condition of Specified Devices

For each individual application, the devices are supplied from the factory with a
dedicated hardware and software configuration. Changes in hardware, software
and firmware are permitted exclusively within the framework of the various
alternatives that are documented in the specific manuals. WAGO Kontakttechnik
GmbH & Co. KG will be exempted from any liability in case of changes in
hardware or software as well as to non-compliant usage of components. Please
send your requests for modified and new hardware or software configurations
directly to WAGO Kontakttechnik GmbH & Co. KG.

Manual

Version 1.0.0

«
...
8
9
10
11
12
...
»

Содержание PERSPECTO VP Visu-Panel 762



















































Отзывы:

Нет отзывов