WAGO-I/O-SYSTEM 750
Mounting
29
753-501 2DO 24V DC 0,5A
Manual
Version 1.2.0
5.3.1
Coding
Coding using small plastic pins and sockets facilitates mating of the module with
the appropriate connector.
1.
Insert the pin into the socket.
Figure 13: Assembling the Coding Fingers
2.
Position the assembled coding fingers in the I/O module. Due to its design,
each coding finger allows four different coding options (i.e.; 16 different
options using two coding fingers).
Figure 14: Inserting the Coding Fingers
3.
Place the connector onto the I/O module.
Figure 15: Plugging the Connector into Place
