24 Properties
WAGO Edge Computer
752-9800
Manual
Version 1.0.0
4.6
Operating Elements
4.6.1
ON/OFF Button
The ON/OFF button can be used to switch the product on and off. The button can
be configured in the BIOS or using a DIP switch SW1 on the motherboard so that
the product is automatically switched on when power is available (AT mode).
Option 1: Configuration in the BIOS
Chipset
→
Sout Bridge
→
Restore AC power loss
Restore AC power loss
• Power off = ATX mode
• Power on = AT mode
• Last State (default)
Option 2: Configuration with a DIP switch SW6
• ON = ATX mode
• OFF = AT mode
4.6.2
Reset Button
The Reset button is installed behind drilling to prevent operating errors. It is a
shortstroke button with a low actuating force of 1.1 … 2.1 N (110 … 210 gf). The
button can be actuated using a suitable object (e.g., pen).
You can perform a hardware reset with the reset button.
