WAGO Edge Computer
Regulations 11
752-9800
Manual
Version 1.0.0
1.8
Legal Bases
1.8.1
Subject to Changes
WAGO Kontakttechnik GmbH & Co. KG reserves the right to provide for any
alterations or modifications. WAGO Kontakttechnik GmbH & Co. KG owns all
rights arising from the granting of patents or from the legal protection of utility
patents. Third-party products are always mentioned without any reference to
patent rights. Thus, the existence of such rights cannot be excluded.
1.8.2
Personnel Qualification
All sequences implemented on Series 752 devices may only be carried out by
electrical specialists with sufficient knowledge in automation technology. These
specialists must be familiar with the current standards and guidelines for the
devices and the automated environments.
1.8.3
Intended Use
The Edge computer is suitable for use in the area of control and automation. Its
use extends industrial areas. Technical data must be observed for all types of
applications.
The product is an open system and is designed for installation in an additional
enclosure.
This product fulfills the requirements of protection type IP40 and is designed for
use in dry indoor spaces.
1.8.3.1 Improper Use
Improper use of the product is not permitted. Specifically, improper use occurs in
the following cases:
•
Non-observance of the intended use.
•
Use without protective measures in an environment in which moisture, salt
water, salt spray mist, dust, corrosive fumes, gases, direct sunlight or
ionizing radiation can occur.
•
Use of the product in areas with special risk that require flawless
continuous operation and in which failure or operation of the product can
result in an imminent risk to life, limb or health or cause serious damage to
property or the environment (such as the operation of nuclear power plants,
weapon systems , aircraft and motor vehicles).
1.8.3.2 Warranty and Liability
The terms set forth in the General Business & Contractual Conditions apply to
deliveries and services of WAGO Kontakttechnik GmbH & Co. KG, and the
