WAGO ETHERNET Accessories 852
Mounting
27
852-1111 5 Port 1000BASE-T Industrial ECO Switch
Manual
Version 1.3.0, valid fromFW/HW Version 02/04
5
Mounting
Make sure that the heat output from the industrial ECO switch and ventilation
around it is adequate. Do not place any heavy objects on the industrial ECO
switch.
5.1
Installation on a Carrier Rail
The carrier rail must optimally support the EMC measures integrated into the
system and the shielding of the internal data bus connections.
Place the industrial ECO switch onto the carrier rail from the top and snap it into
position.
Figure 7: Snapping onto the carrier rail
5.2
Removal from DIN-Rail
To remove the device from the carrier rail, press down on the industrial ECO
switch and pull it out of the carrier rail.
Figure 8: Removing the device from the carrier rail
