0787-1216
Notes on Operation
Product manual | Version: 1.0.0
35
Compact Power Supply
Table 31: Legend for the “Output Characteristics” Figure
Position
Explanation
1
I
OUT(IST)
normal
2
Overload mode (1.05 × I
OUT
< I
OUT(IST)
< 1.35 × I
OUT
); constant power mode
3
Short circuit protection (1.4 × I
OUT
< I
OUT(IST)
); Hiccup mode
7.5 Maintenance
Note
Observe the following for long-term storage:
For long-term storage, power must be applied to equipment with built-in capacitors for
five minutes at least every two years.
The product requires no special maintenance; however it must be protected (as per the
protection class) against dust accumulation, moisture, radiation and aggressive chemi-
cals.
Permitted repairs are limited to the measures listed in these operating instructions.
Should a fault occur nonetheless, return the product to WAGO for repair. Provide the fol-
lowing information:
• Type of fault
• Circumstances (operating conditions, input wiring)
• Your suspicion about the fault’s cause
• Previous instances of unusual incidents etc.
The convenient, standardized and therefore faster RMA process is available for returns
and reports of defects. The corresponding report form for returns and reports of defects is
available at
ü
https://www.wago.com/us/ruecksendungen-reklamationen
.
