WAGO-SPEEDWAY 767
Mounting
31
767-4801/000-800 8DO 24V DC 0.5A IF (8xM8)
Manual
Version 1.1.0
Pos: 21.10 /Serie 767 ( WAGO-SPEED WAY)/Monti eren/I/O-M odule/Montage_Direktmontage 767- xxxx allgemei n_1 @ 5\mod_1249029032515_21.docx @ 39651 @ 2 @ 1
4.3
Direct Mounting on Your System
Mount the module directly on a level surface of your system, without using
WAGO accessories. Direct mounting of the module is to be carried out as follows:
1. Disconnect the power supply from those devices on which you wish to
mount the module.
2.
Mark the drill holes using the hole drilling template printed on the
packaging. You can also hold the module in the desired position and mark
the drill holes. Ensure that there is sufficient space around the 767 Series
components to enable you to connect all cable without problems.
Pos: 21.11 /Serie 767 ( WAGO-SPEED WAY)/Wichtige Erläuter ung en/Sicherheitshinweise/Hinweis/Hi nweis: 767- xxxx Distanzstück @ 8\mod_1279025151416_21.docx @ 59810 @ @ 1
Direct Mounting
We recommend using WAGO spacers for compact direct mounting. If these are
used, the resulting additional distance from the second 767 Series component is to
be noted. See section “Mounting the Module” > “Mounting the Spacer in the Case
of Compact Arrangement”.
Pos: 21.12 /Serie 767 ( WAGO-SPEED WAY)/Monti eren/I/O-M odule/Montage_Direktmontage 767- xxxx allgemei n_2 @ 8\mod_1279025380479_21.docx @ 59813 @ @ 1
3.
Fasten the module with two M4x12 screws via the two mounting holes.
Pos: 21.13 /Serie 767 ( WAGO-SPEED WAY)/Monti eren/I/O-M odule/Montage_Direktmontage 767- xxxx_8xM 8 - Bild @ 5\mod_1249028893593_21.docx @ 39647 @ @ 1
Figure 8: Mounting the module on the grounded system
Pos: 21.14 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1
