WAGO 765-1205/100-000, Руководство по эксплуатации продукта

Страница: 58 / 134

765-1205/100-000 Commissioning
58 Product manual | Version: 2.0.0
8DIO FLD EC DC 24V 2.0A
10.2.1.2 Setting Parameters
You can set the parameters for the module in the configuration software of the EtherCAT
®
master. The existing parameters contain the basic settings for the module, which you can
adapt to your application. Set the module and port parameters in the start-up parameters
in the configuration software of the EtherCAT
®
master. The EtherCAT
®
master sends
these parameters to the module when communication starts up.
You can find all the module parameters in
8
Module Parameters [
}
41] .
10.3 Parameterization
The following tools are described below:
•
8
WAGO Webserver I/O Field [
}
58]
•
8
WAGO I/O Field app [
}
76]
•
8
OPC UA Server [
}
76]
10.3.1 WAGO Webserver I/O Field
10.3.1.1 Call WAGO Webserver I/O Field
This section describes how you can use the integrated software WAGO I/O Field Web-
server to get access to detailed information on the current operating state of the product
and make settings to affect the product’s behavior.
ü Requirement: Opening the user interface of WAGO I/O Field Webserver requires that
product’s IP address is configured and known.
• Proceed as follows:
Enter the following text in the address bar of your Web browser to address the prod-
uct:
http://<IP-address-according-to-configuration>
e.g.,
http://192.168.10.2
.
ð
The WAGO I/O Field Webserver Dashboard appears. You can now use the functions
described below.