50 Commissioning
WAGO-I/O-SYSTEM
750
753-647 DALI Multi-Master Module
Manual
Version 1.0.0
Get the WAGO-DALI Configurator; integrated into WAGO-I/O-CHECK, or
as a free download!
The WAGO-DALI Configurator is integrated into the WAGO-I/O-
CHECK
commissioning tool (Item No.: 759-302) starting from Version 03.04.01.09, or
you can download the WAGO-DALI Configurator free of charge as a stand-alone
tool from the WAGO Internet site at:
More information about WAGO-I/O-CHECK and the WAGO-DALI
Configurator!
A detailed description of the WAGO-I/O-
CHECK
software and the WAGO-
DALI Configurator is given in the manuals for these products.
You can download these manuals free of charge from the WAGO Internet site at:
7.2
Accessing the DALI-Multi-Master Module
You can access the DALI-Multi-Master module via the WAGO-DALI
Configurator.
A communication link must be set up via the IP address of the WAGO PLC
connected at the fieldbus node to ensure proper data exchange with the DALI-
Multi-Master module via the WAGO-DALI Configurator. You can set up this link
using WAGO-I/O-
CHECK
.
7.3
Module Configuration Notes
You can make general settings for the DALI-Multi-Master module in the dialog
window view of the WAGO-DALI Configurator for module configuration.
You can open the module configuration dialog window by clicking the
[Module]
button in the WAGO-DALI Configurator toolbar.
In this dialog window you can, for example, define special settings for the Easy
mode and Full mode, along with network options such as device polling (bus
scan) and the response in the case of erroneous telegrams.
In this window you can also de-activate the internal DALI network power supply
in the DALI-Multi-Master module to connect an external DALI network power
supply.
The displayed buttons can be used to export the DALI-Multi-Master module
settings and to write defined settings to the DALI-Multi-Master module.