WAGO 751-9301 Скачать руководство пользователя страница 76

Страница: 76 / 198

76 Connecting

WAGO I/O System Compact

751-9301 Compact Controller 100

Manual

Version 1.1.0, valid from FW Version 03.08.07(20)

Connecting

7.1

Earthing

The controller is grounded by the spring contacts on the underside of the product

by snapping it onto the grounded DIN-rail (see figure in “Mounting” > “Insert

Controller”).

7.2

Connecting Devices

The

ETHERNET interfaces

are used to connect to a LAN or to the Internet for

communication with the controller. Crossover or patch cables category 5e can be

used.

Do not use USB devices connected to earth!

USB interface shielding is not earthed directly, rather via interference-

suppression capacitor. Only keyboards, mice and USB memory sticks may be

connected. Do not connect devices that are earthed, e.g., printers, because they

bridge the interference-suppression capacitors and thus interference immunity is

reduced.

Insert

microSD

memory cards as far into the slot until they click into place. The

slot can be sealed to protect the card.

To remove, press the card further down until the lock releases. The card can then

be removed.

The USB service interface is designed as a USB-C socket. The interface

supports USB Specification 2.0.

The controller appears on the host device (PC) as a peripheral device in device

mode.

The controller uses the fixed IP address 192.168.42.42 to communicate with a

PC.

For more information about the interfaces, see section “Device Description” >

“Connectors” and “Technical Data”.

7.3

Connecting the Power Supply

Connect the power supply to connector X4, pin 1 (U

+) and 2 (GND). To do this,

you must also use the included 2091-1122 Female Connector.

Содержание 751-9301







































































































































































































Результаты поиска

Содержание 751-9301

Отзывы:

Похожие инструкции для 751-9301

Бренды по названию

Популярные бренды

WAGO 751-9301, Руководство пользователя

Результаты поиска

Содержание 751-9301

Отзывы:

Похожие инструкции для 751-9301

Бренды по названию

Популярные бренды