20
Mounting
WAGO-I/O-SYSTEM 750
750-616 Separation module
Manual
Version 1.1.0
Pos : 22.5 /Serie 750 (WAGO-I/ O-SYST EM)/M ontieren/D emontieren/ G erät e einfüg en und ent fer nen - Ü berschrif t 2 @ 3\ mod_1231768483250_21. doc x @ 25950 @ 2 @ 1
4.2
Inserting and Removing Devices
Pos : 22.6 /All e Seri en ( Allgemei ne Module)/ Wic htige Erläut erungen/ Sicherheits- und sons tige Hi nweis e/ Ac htung/ Achtung: Arbeit en an Ger ät en nur s pannungsfr ei durc hführ en! @ 6\mod_1256193963573_21.doc x @ 43426 @ @ 1
Perform work on devices only if they are de-energized!
Working on energized devices can damage them. Therefore, turn off the power
supply before working on the devices.
Pos : 22.7 /Serie 750 (WAGO-I/ O-SYST EM)/M ontieren/D emontieren/ Bus klemme einfüg en @ 3\ mod_1231769726703_21.doc x @ 25989 @ 3 @ 1
4.2.1
Inserting the I/O Module
1.
Position the I/O module so that the tongue and groove joints to the fieldbus
coupler/controller or to the previous or possibly subsequent I/O module are
engaged.
Figure 3: Insert I/O module (sample)
2.
Press the I/O module into the assembly until the I/O module snaps into the
carrier rail.
Figure 4: Snap the I/O module into place (sample)
With the I/O module snapped in place, the electrical connections for the data
contacts and power jumper contacts (if any) to the fieldbus coupler/controller or to
the previous or possibly subsequent I/O module are established.
Pos : 22.8 /Dokumentation allgemei n/ Glieder ungs elemente/---Seit enwechs el--- @ 3\ mod_1221108045078_0.doc x @ 21810 @ @ 1
