20
Device Description
WAGO-I/O-SYSTEM 750 XTR
750-557/040-000 4AO +/-10V DC /XTR
Manual
Version 1.3.0
3.2.3
CAGE CLAMP
®
Connectors
Figure 4: CAGE CLAMP
®
Connectors
Table 5: Legend for Figure
“CAGE CLAMP
®
C
onnectors”
Channel
Designation
Connector Function
1
AO 1
1
Analog output 1: Signal voltage
Common
(ground)
2
Analog output 1: Common (ground)
2
AO 2
5
Analog output 2: Signal voltage
Common
(ground)
6
Analog output 2: Common (ground)
3
AO 3
3
Analog output 3: Signal voltage
Common
(ground)
4
Analog output 3: Common (ground)
4
AO 4
7
Analog output 4: Signal voltage
Common
(ground)
8
Analog output 4: Common (ground)
Use shielded signal lines!
Only use shielded signal lines for analog signals and I/O modules which are
equipped with shield clamps. Only then can you ensure that the accuracy and
interference immunity specified for the respective I/O module can be achieved
even in the presence of interference acting on the signal cable.
For further information about shielding, see system manual WAGO-I/O-SYSTEM
750 XTR, section
“Connect Devices” > … > “Shielding.”
