WAGO-I/O-SYSTEM 750
Process Image
27
750-530 8DO 24V DC 0.5A
Manual
Version 1.2.0
Pos: 70 /All e Seri en (Allgemei ne Module)/Ü berschriften für alle Serien/__ noch nicht ei nsortierte Ü berschriften müssen noch einsorti ert werden __/Prozessabbil d - Ü berschrift 1 @ 4\mod_1240983067828_21.docx @ 31942 @ 1 @ 1
4
Process Image
Pos: 71 /Serie 750 ( WAGO-I/O-SYST EM)/Prozessabbild Kl emmenbus/Hinweis: Prozessabbildmapping abhängig von FBK/PFC, ohne Status-/C ontr olbyte @ 6\mod_1256126797251_21.docx @ 43340 @ @ 1
Mapping of process data in the process image of fieldbus systems
The representation of the process data of some I/O modules or their variants in the
process image depends on the fieldbus coupler/controller used. Please take this
information from the section “Fieldbus Specific Design of the Process Data”
included in the description concerning the process image of the corresponding
fieldbus coupler/controller.
Pos: 72 /Serie 750 ( WAGO-I/O-SYST EM)/Prozessabbild Kl emmenbus/Digitalausg angskl emmen/Prozessabbild 750- x5xx 08 DO @ 4\mod_1236259349828_21.docx @ 28024 @ @ 1
Table 17: Output Bits
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
DO 8
DO 7
DO 6
DO 5
DO 4
DO 3
DO 2
DO 1
DO 1
Signal state DO 1 – Digital output channel 1
DO 2
Signal state DO 2 – Digital output channel 2
DO 3
Signal state DO 3 – Digital output channel 3
DO 4
Signal state DO 4 – Digital output channel 4
DO 5
Signal state DO 5 – Digital output channel 5
DO 6
Signal state DO 6 – Digital output channel 6
DO 7
Signal state DO 7 – Digital output channel 7
DO 8
Signal state DO 8 – Digital output channel 8
Pos: 73 /D okumentation allgemei n/Glieder ungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1
