WAGO 2789-9023, Руководство пользователя

Страница: 34 / 94

2789-9023 Fieldbus Description
34 Product manual | Version: 1.0.0
EtherNet/IP Communication Module
DC Output
Table 31: Parameters – DC Output
Attribute ID Access Data type Description
136 Get/Set UINT16 Output voltage (unit: mV)
137 Get/Set UINT16 Warning threshold (unit: mA)
138 Get/Set UINT16 Bit 0 Switch output on
Bit 1 “Active droop” parallel switching mode
Bit 2 Overload threshold enabled
Bit 3 Enable switching the DC output on and off
via cyclic process data
Bits 4 … 5 Reserved
Bit 6 1 Constant current
Bit 7
1
Constant current with latching shutdown
Bit 8
1
Hiccup mode
Bit 9
1
Electronic circuit breaker
Bits 10 …
11 Reserved
Bit 12 Latching shutdown on thermal overload
Bit 13 PowerBoost
Bit 14 TopBoost
Bit 15 Reserved
139 Get/Set UINT16 Switch-on delay (unit: ms)
1 At least one bit must be set, and the bits are mutually locked.
Electronic Circuit Breaker Mode
Table 32: Parameters – Electronic Circuit Breaker Mode
Attribute ID Access Data type Description
148 Get/Set UINT16 Trip current (unit: mA)
149 Get/Set UINT16 Trip delay (unit: ms)
Signaling – Digital Input
Table 33: Parameter – Signaling – Digital Input
Attribute ID Access Data type Description
168 Get/Set UINT16 Bit 0 Switch power supply on and off
Bits 1 … 9 Reserved
Bit 10
1
Inversion
Bit 11
1
Function on edge change (0 to 1)
Bit 12
1
Function on edge change (1 to 0)
Bits 13 … 15 Reserved
1 All bits can be 0 and are mutually locked.
Signaling – Digital Output
Table 34: Parameter – Signaling – Digital Output
Attribute ID Access Data type Description
176 Get/Set UINT16 Bit 0 DC status OK
Bit 1 Overload threshold exceeded
Bit 2 Electronic circuit breaker tripped
Bit 3 Latching shutdown occurs