WAGNER WoodPerfect W 600, Оригинальная инструкция по эксплуатации

Страница: 22 / 52

16
W 600 WoodPerfect GB
Description (Fig. 1)
13 Container 14 Stir stick
Coating Materials Suitable for Use
Finishes, wood sealer-preservatives, staining sealers, oils, clear finishes, water- and
solvent-based paints, primers, 2-component paints
Coating Materials Not Suitable for Use
Wall paints
Alkali and acidic paints.
Coating materials with a flash point below 21°C.
Preparation of the Coating Material
The W 600 can be used to spray paints, varnishes and glazes that are undiluted or slightly
diluted. Detailed information is available in the technical data sheet of the manufacturer
(

Internet Download).
Stir the material up and put the required amount into the paint container. 1.
Thinning recommendation
Sprayed material
Glazes undiluted
Wood preservatives, mordants, oils, disinfection agents,
plant protective agents undiluted
Paints containing solvents and water-soluble paints,
primers, thick-film glazes dilute by 5 - 10 %
If the convey capacity is too low, add 5 - 10 % dilution step-by-step until the convey 2.
capacity fulfils your requirements.
Start­up
Before connecting to the mains supply, be sure that the supply voltage is identical with
the value given on the rating plate.
Attach the carrying strap to the unit.
•
(Fig. 2
)
Unscrew the container from the spray gun.
•
Aligning suction tube.
•
(Fig. 3)
If the suction tube is positioned correctly, the container contents can be sprayed
without almost any residue.
When spraying horizontal surfaces, turn suction tube forward. (Fig. 3 A)
When spraying objects overhead, turn suction tube back. (Fig. 3 B)
Set the container on a sheet of paper, pour in the prepared coating material and
•
screw the container tightly onto the spray gun.