42
W 950 Flexio/ W 975 Flexio
W
all pain
t
42
W 950 Flexio/ W 975 Flexio
EN
12.
Multifunction switch settings (fig.
4, A)
FILL/
CLEAN
Settings for cleaning and
pre-filling the system
OFF
System is off
ON
Operating setting
i
When using the spray
attachment for varnish paints
and glazes, the FILL/CLEAN
functions may not be used!
13.
Setting the flow rate when working with the spray
lance (fig. 4, B)
The material quantity is set depending on the characteristics of the material (viscosity)
and the working speed of the operator.
This setting can be made variably with the material flow limiter:
lower material
turn to the left
higher material
turn to the right
i
We recommend starting with a low material flow setting and then gradually
adjusting this to suit needs. .
14.
Setting the width of the spray jet on the spray lance
(Fig. 5)
A =
wide spray
jet (black or
yellow)
For coating larger surfaces
Working with a large flow
rate (black area or yellow
area on quantity scale)
B =
narrow spray
jet (white)
For coating smaller areas,
corners and edges
Working with a small flow
rate (white area on quantity
scale)
A
B
Volume
A
B
