WAGNER W 890 FLEXIO, Оригинальная инструкция по эксплуатации

Страница: 13 / 30

GB
25
W 890 Flexio
5. Service
a) Have your tool repaired only by qualified specialist personnel and only with
original spare parts. This ensures that the tool safety is maintained.
b) If the supply cord is damaged, it must be replaced by the manufacturer or it’s
service agent or a similarly qualified person in order to avoid a safety hazard.
3. Safety Instructions for Spray Guns
ATTENTION! EXPLOSION HAZARD!
Do not store flammable materials in the base device!
Only store materials in the basic device in containers that close airtight!
Remove any material that may have leaked into the basic device
immediately and allow the device to dry completely before using it! Do not
store materials contained solvents in the basic device during operation!
•
CAUTION! Wear breathing equipment: Paint mist and solvent vapors are
damaging to health. Always wear breathing equipment and only work in
well ventilated rooms or using supplementary ventilating equipment. It is
advisable to wear working clothing, safety glasses, ear protection and gloves.
CAUTION: Danger of injury! Never point the spray stream towards
human beings or animals.
Sockets and plugs must be masked. Risk of an electric shock as a
consequence of sprayed material entering the socket!
Attention! Never operate the device if the nozzle seal is either
damaged or missing. If the nozzle seal is either missing or damaged
liquids can enter the device and increase the risk of an electric shock.
Check the nozzle seal before each use and tighten the union nut.
•
Do not use the spray guns to spray flammable substances.
•
The spray guns are not to be cleaned with flammable solvents.
•
Caution against dangers that can arise from the sprayed substance and observe the
text and information on the containers or the specifications given by the substance
manufacturer.
•
Do not spray any liquid of unknown hazard potential.
•
The device may not be used in workplaces covered by the explosion-protection
regulations.
•
To avoid the hazard of explosion when spraying, provide for effective natural or artificial
ventilation.
•
There must be no sources of ignition such as, for example, open fires, smoke of lit
cigarettes, cigars and tobacco pipes, sparks, glowing wires, hot surfaces, etc. in the
vicinity during spraying.