WAGNER W 600 FLEXIO 18V, Перевод оригинальной инструкции по эксплуатации

Страница: 20 / 30

20
W 600 Flexio 18V EN
16. Spray Technique
i
The spray result depends heavily on the smoothness and cleanliness of the
surface to be sprayed. Therefore the surface should be carefully prepared and
kept free of dust.
•
Cover all surfaces not to be sprayed.
•
Cover screw threads or similar parts of the target object.
i
Important: Start at the edge of the area to be sprayed. Start the spray
movement first of all, and then press the trigger. Avoid interruptions
within the area to be sprayed.
•
The spray movement should come from the arm, not just from the wrist. This ensures that
a uniform distance is maintained between the spray gun and the spray surface during
the spray operation. Select a distance of 5 - 15 cm, depending on the desired spray jet
width. When you are using interior wall paint, the distance should be about 20-30 cm
(approx. one stirring rod in length).
Fig. 12 A/ 12 B: CORRECT
Even distance to the object.
Fig. 12 C: INCORRECT An uneven distance will result in uneven paint
application.
•
Move the spray gun evenly cross-wise or up-and-down, depending on the spray
pattern setting.
•
An even movement of the spray gun results in an even surface quality.
i
Important: Wipe off the nozzle and air cap regularly
to make sure they do not get blocked.
i
"Cross spray" when using paint with a poor covering capacity or if the
surface is highly absorbent (Fig. 13).
•
Interior wall paint in strong colour shades should be applied at least twice (allow first
paint coat to dry first). This will ensure good coverage.
i
For larger projects, it is useful to have a charged spare battery ready to continue For larger projects, it is useful to have a charged spare battery ready to continue
working without interruption. working without interruption.
17. Interruption of Work
•
Turn the machine off.
•
Put the machine down only on a level, clean surface. Otherwise the machine could tip
over!
•
During longer breaks, vent the container by briefly opening and then closing it again.
•
Clean nozzle openings after an interruption in operation.