Start
up
10
0241891
– PI-P1 / PI-F1
08/2008
2.3.2 Powder injector PI-P1
Caution
Deactivate the high voltage!
Proceed as follows:
1. Check that the high voltage has been
deactivated.
2. Connect the feed air and dosage air.
3. Disconnect powder feed hose
S
, plug-
in nipple
F
for the feed air and cou-
pling
D
for the dosage air from the
powder injector.
4. Pull the powder injector out of the in-
jector connection.
5. Blow through the powder injector from
the powder intake
A
with spurts of
compressed air and clear of all pow-
der residue or deposits.
6. Connect the powder feed hose
S
,
plug-in nipple
F
for the feed air and
coupling
D
for the dosage air to the
powder injector again.
7.
Check the grounding before
re-starting.
