background image

57

PEA-C4XL-S

OPERATING MANUAL

VERSION 03/2014

ORDER NUMBER DOC2345334

10.2 

DISPOSAL

Do not dispose of used electrical equipment with household 
refuse!

In accordance with European Directive 2002/96/EC on the disposal 
of used electrical equipment and its implementation in national 
law, this product may not be disposed of with the household refuse, 
but must be recycled in an environmentally correct manner.
Wagner or one of our dealers will take back your used Wagner waste 
electrical or electronic equipment and will dispose of it for you in 
an environmentally friendly way. Please contact one of our service 
points, one of our representatives or us directly to arrange this.

NOTICE

Procedure:

1.

Switch off  the high-voltage generation on the control unit, close the compressed air 
supply and relieve the system of pressure.

2.

Press locking button 1 and carefully remove the gun from supporting tube 2.

3.

Disconnect electrical cable 3 from connection I on the spray gun.

4.

Disconnect the powder feed hose 4 from connection G on the spray gun.
(For handling of the hose coupling, see Chapter 6.5.)

5.

Disconnect the atomizing air hose 5 from connection K on the spray gun.

6.

Detach the grounding cable 6 from grounding screw L on the spray gun.

7.

Dismount supporting tube 2 on the gun attachment.

Содержание PEA-C4XL-S













































































Отзывы: