WAGNER HT1000, Перевод оригинальной инструкции по эксплуатации

Страница: 12 / 34

8
HT1000 GB
Translation of the original operating instructions
Read the operating instructions carefully before using the tool and observe the
safety instructions. Keep the operating instructions in a safe place.
General Safety Instructions
Caution!
Read all the instructions. Non-observance of the instructions below can
cause electric shock, fire and or serious personal injuries. The term "power
tool" used below covers both mains-operated power tools (with mains lead)
and accumulator-operated power tools (without mains lead).
1. Workplace
a) Keep your workplace clean and tidy.
Untidiness and unlit working areas can lead
to accidents.
b) Never use the tool in hazardous areas that contain flammable liquids, gases
or dusts. Power tools generate sparks that can ignite the dust or vapors.
c) Keep children and other persons away when using the power tool. You can
lose control of the tool if you are distracted.
2. Electrical Safety
a) The tool plug must fit into the socket. The plug may not be modified in any
form. Do not use adaptor plugs together with protective­earthed tools.
Unmodified plugs and suitable sockets reduce the risk of an electric shock.
b) Avoid physical contact with earthed surfaces such as pipes, heating
elements, stoves and refrigerators.
The risk through electric shock increases if
your body is earthed.
c) Keep the equipment away from rain and moisture. The risk of an electric shock
increases if water penetrates electrical equipment.
d) Do not misuse the mains lead by carrying the tool by the lead, hanging it
from the lead or by pulling on the lead to remove the plug. Keep the lead
away from heat, oil, sharp edges or moving tool parts. Damaged or twisted
leads increase the risk of an electric shock.
e) If you work outdoors, use only extension leads that are approved for
outdoor use.
The use of an extension lead that is suitable for outdoors reduces the
risk of an electric shock.
3. Safety of Persons
a) Be attentive. Pay attention to what you are doing and work sensibly with
a power tool. Do not use the tool if you are tired or under the influence of
drugs, alcohol or medication.
Just a moment of inattentiveness while using the
tool can lead to serious injuries.